鐵皮風管加工規范要點
Key points of processing specifications for iron sheet air ducts
預處理與保護：
Preprocessing and Protection:
風管加工前需編號預排布，合理布置各部位管段長度。
Before processing the air ducts, they need to be numbered and pre arranged, and the lengths of each section of the ducts should be arranged reasonably.
制作場地應鋪設保護材料，防止風管鍍鋅層受損。
The production site should be covered with protective materials to prevent damage to the galvanized layer of the air duct.
加工要求：
Processing requirements:
風管法蘭應平整，焊縫飽滿，鐵皮翻邊量控制在6-9mm。
The flange of the air duct should be flat, the weld seam should be full, and the amount of iron sheet flanging should be controlled within 6-9mm.
法蘭卡無毛刺，規格一致，安裝時一正一反，間距不大于100mm。
The flange card has no burrs, consistent specifications, and is installed in a straight and reverse direction with a spacing of no more than 100mm.
鉚釘與法蘭螺栓間距一致，破壞的鍍鋅層需防腐處理。
The distance between rivets and flange bolts should be consistent, and the damaged galvanized layer needs anti-corrosion treatment.
安裝規范：
Installation specifications:
變徑風管夾角控制：?jiǎn)蚊嫘∮?0°，雙面小于60°。
Variable diameter duct angle control: less than 30 ° on one side and less than 60 ° on both sides.
風管彎頭、三通等應制作為順水形式。
Duct bends, tees, etc. should be made in a streamlined form.
水平安裝時，根據風管直徑或邊長確定吊架間距。
When installing horizontally, determine the spacing between hangers based on the diameter or side length of the air duct.
長風管應設置防止擺動的固定點。
Long air ducts should be equipped with fixed points to prevent swinging.
鐵皮風管加工需遵循嚴格的規范，以確保風管的質量和性能符合標準和工程要求。
The processing of iron sheet air ducts must follow strict specifications to ensure that the quality and performance of the ducts meet national standards and engineering requirements.
本文由濟南鐵皮風管加工提供幫助，更多的相關內容請點擊：http://www.woaisoul.com希望本文能夠為您帶來幫助，感謝您的閱讀！
This article is assisted by the processing of Jinan iron sheet air ducts. For more related content, please click: http://www.woaisoul.com I hope this article can be helpful to you. Thank you for reading!
